Update README.md

README.md

@@ -9,7 +9,7 @@ $ lsblk
 **Partition the device using gdisk (assuming /dev/sda).**
 $ gdisk /dev/sda
 
-Create GPT and EFI-partion.
+**Create GPT and EFI-partion.**
 $ o     # _Creates new GPT-partition table._
 $ y     # _Accept._
 $ n     # _New partition._
@@ -17,152 +17,159 @@ $ +512M # _512 MB should be plenty for /boot._
 $ ef00  # _Mark as EFI._
 $ n     # _New main partition, accept all the following using "y"._
 
- Print and check your partitions.
+**Print and check your partitions.**
 $ p
 
-Write partitions to device.
+**Write partitions to device.**
 $ w
 $ y     # _Accept._
 
-# Encrypt primary partition.
+**Encrypt primary partition.**
 $ cryptsetup -c aes-xts-plain -y -s 512 luksFormat /dev/sda2
 $ YES
 
-# Open encrypted partition, map as "root" and create filesystem.
+**Open encrypted partition, map as "root" and create filesystem.**
 $ cryptseup luksOpen /dev/sda2 root
 $ mkfs.fat -F 32 -n UEFI /dev/sda1
-# -F specifies the type of file allocation tables used (12, 16 or 32 bit).
-# -n sets the volume name (label) of the filesystem to "UEFI".
+**-F specifies the type of file allocation tables used (12, 16 or 32 bit).**
+**-n sets the volume name (label) of the filesystem to "UEFI".**
 
-# Create ext4 filesystem on primary partition.
+**Create ext4 filesystem on primary partition.**
 $ mkfs.ext4 /dev/mapper/root
 
-# Create mountpoints and mount partitions.
+**Create mountpoints and mount partitions.**
 $ mount /dev/mapper/root /mnt
 $ mkdir /mnt/boot
 $ mount /dev/sda1 /mnt/boot
 
-# Optionally update mirrorlist using reflector.
-# In this case use the latest 10 mirrors from Germany, that have been synchronized within the last 24 hours and sort the by download-rate and write them to the pacman mirrorlist.
+**Optionally update mirrorlist using reflector.**
+**In this case use the latest 10 mirrors from Germany, that have been synchronized within the last 24 hours and sort the by download-rate and write them to the pacman mirrorlist.**
 $  reflector --verbose --latest 10 --country Germany --age 24 --sort rate --save /etc/pacman.d/mirrorlist
 
-# Install base system and basic packages (network, editor, sudo).
-# The package base-devel is not necessary but recommended.
+**Install base system and basic packages (network, editor, sudo).**
+**The package base-devel is not necessary but recommended.**
 $ pacstrap /mnt base base-devel linux linux-firmware networkmanager nano sudo
 
-# Generate fstab.
+**Generate fstab.**
 $ genfstab -Lp /mnt > /mnt/etc/fstab
-# -L = Use labels for source identifiers (shortcut for -t LABEL).
-# -p Exclude pseudofs mounts (default behavior).
+**-L = Use labels for source identifiers (shortcut for -t LABEL).**
+**-p Exclude pseudofs mounts (default behavior).**
 
-# Chroot into your installation.
+**Chroot into your installation.**
 $ arch-chroot /mnt
 
-# Set your hostname.
+**Set your hostname.**
 $ echo mycomputer > /etc/hostname
 
-# Generate locale.gen for your preferred language (and preferribly english).
+**Generate locale.gen for your preferred language (and preferribly english).**
 $ nano /etc/locale.gen
-# Uncomment your language, e.g. de_DE.UTF-8 UTF-8 (and en_US.UTF-8).
+**Uncomment your language, e.g. de_DE.UTF-8 UTF-8 (and en_US.UTF-8).**
 
-# Generate the locale.
+**Generate the locale.**
 $ locale-gen
 
-# Add necessary HOOKS and MODULES.
+**Add necessary HOOKS and MODULES.**
 $ nano /etc/mkinitcpio.conf
 
-# MODULES=(ext4)
-# HOOKS=(base udev autodetect modconf block keyboard keymap encrypt filesystems fsck shutdown)
+**MODULES=(ext4)**
+**HOOKS=(base udev autodetect modconf block keyboard keymap encrypt filesystems fsck shutdown)**
 
-# Create mkinitcpio.
+**Create mkinitcpio.**
 $ mkinitcpio -p linux
 
-# Start NetworkManager for automatic network access on next boot.
+**Start NetworkManager for automatic network access on next boot.**
 $ systemctl enable NetworkManager
 
-# Set a root-password.
+**Set a root-password.**
 $ passwd
 
-# Install systemd-boot bootloader.
+**Install systemd-boot bootloader.**
 $ bootctl install
 
-# Create the bootloader config.
+**Create the bootloader config.**
 $ nano /bootloader/entries/arch.conf
 
-# Add the following:
-# title    Arch Linux
-# linux    /vmlinuz-linux
-# initrd   /initramfs-linux.img
-# options  cryptdevice=/dev/sda2:root root=/dev/mapper/root rw lang=de init=/usr/lib/systemd/systemd locale=de_DE.UTF-8
+**Add the following:**
+```
+title    Arch Linux
+linux    /vmlinuz-linux
+initrd   /initramfs-linux.img
+options  cryptdevice=/dev/sda2:root root=/dev/mapper/root rw lang=de init=/usr/lib/systemd/systemd locale=de_DE.UTF-8
+```
 
-# Create a fallback config.
+
+**Create a fallback config.**
 $ cp /boot/loader/entries/arch.conf /boot/loader/entries/arch-fallback.conf
 
-# Edit the fallback config.
+**Edit the fallback config.**
 $ nano /boot/loader/entries/arch-fallback.conf
 
-# Change it to the following:
-# title    Arch Linux Fallback
-# initrd   /initramfs-linux-fallback.img
+**Change it to the following:**
+```
+title    Arch Linux Fallback
+initrd   /initramfs-linux-fallback.img
+```
 
-# Edit loader config.
+**Edit loader config.**
 $ nano /boot/loader/loader.conf
 
-Change it to the following:
-# timeout 1
-# default arch.conf
+**Change it to the following:**
+```
+timeout 1
+default arch.conf
+```
 
-# Exit and reboot
+**Exit and reboot.**
 $ exit
 $ umount /mnt/boot
 $ reboot
 
-# Enter encryption-password and login as root.
+**Enter encryption-password and login as root.**
 
-# Set the keyboard to your preferred language permantently.
+**Set the keyboard to your preferred language permantently.**
 $ echo KEYMAP=de-latin1-nodeadkeys > /etc/vconsole.conf
 
-# Create a user with a /home-directory.
+**Create a user with a /home-directory.**
 $ useradd -m myusername
 
-# Set password for your user.
+**Set password for your user.**
 $ passwd myusername
 
-# Add myusername to group wheel for sudo access.
-$ gpasswd -a myusername wheel
+**Add $myusername to group wheel for sudo access.**
+$ gpasswd -a $myusername wheel
 
-# Edit sudoers-file for sudo access.
+**Edit sudoers-file for sudo access.**
 $ nano /etc/sudoers
 
-# Uncomment „%wheel ALL=(ALL) ALL“
+**Uncomment „%wheel ALL=(ALL) ALL“-**
 
-# Logout as root.
+**Logout as root.**
 $ exit
 
-# Login as you user.
+**Login as you user.**
 
-# Install SDDM and a minimal KDE Plasma.
+**Install SDDM and a minimal KDE Plasma.**
 $ pacman -S sddm sddm-kcm plasma-desktop
 
-# Install KDE terminal for easier installation of packages in Plasma.
+**Install KDE terminal for easier installation of packages in Plasma.**
 $ pacman -S konsole
 
-# Enable and start SDDM to login to Plasma.
+**Enable and start SDDM to login to Plasma.**
 $ systemctl enable sddm
 $ systemctl start sddm
 
-# Now you are logged in to your Plasma desktop environment and ready to configure and use your Arch Linux.
+**Now you are logged in to your Plasma desktop environment and ready to configure and use your Arch Linux.**
 
-# Suggested packages to install.
+**Suggested packages to install.**
 
-# microcode (https://wiki.archlinux.org/index.php/Microcode)
-# kde-gtk-config (Adds graphical settings for GTK apps.)
-# kdeplasma-addons („All kind of addons to improve your Plasma experience.“)
-# kscreen (Adds screen section to graphical settings.)
-# ksystemlog (Graphical system log viewer)
-# partitionmanager (Graphical partition manager)
-# plasma-nm (Network manager applet)
-# plasma-pa (Audio manager applet)
-# powerdevil (Adds energy manager to graphical settings.)
-# spectacle (Graphical screenshot tool.)
-# systemd-swap (https://wiki.archlinux.org/index.php/swap#systemd-swap)
+- microcode (https://wiki.archlinux.org/index.php/Microcode)
+- kde-gtk-config (Adds graphical settings for GTK apps.)
+- kdeplasma-addons („All kind of addons to improve your Plasma experience.“)
+- kscreen (Adds screen section to graphical settings.)
+- ksystemlog (Graphical system log viewer)
+- partitionmanager (Graphical partition manager)
+- plasma-nm (Network manager applet)
+- plasma-pa (Audio manager applet)
+- powerdevil (Adds energy manager to graphical settings.)
+- spectacle (Graphical screenshot tool.)
+- systemd-swap (https://wiki.archlinux.org/index.php/swap#systemd-swap)