Arch-Linux-Installer/install.md

216 lines
6.4 KiB
Markdown

# Simple, modern and secure installation of Arch Linux with KDE Plasma.
_If you won't run into any issues, this should take you under an hour from nothing to a graphical interface. Good luck!_
**Load the preferred keyboard. In my case it's "de" for Germany.**
$ loadkeys de
**List devices to make sure you partition the right device.**
$ lsblk
**Partition the device using gdisk (assuming /dev/sda).**
$ gdisk /dev/sda
**Create GPT and EFI-partion.**
_# Creates new GPT-partition table._
$ o
_# Accept._
$ y
_# Create a new partition, accept default partition number 1 and first sector._
$ n
$ y
$ y
_# Enter partition size (second sector), 512 MB should be plenty for /boot and accept._
$ +512M
_# Mark as EFI._
$ ef00
_# New main partition, accept all the following using "y"._
$ n
**Print and check your partitions. There should be a 512 MiB EFI system partition and a Linux filesystem filling up the rest of the space**
$ p
**Write partitions to device.**
$ w
_# Accept._
$ y
**Encrypt primary partition.**
$ cryptsetup -c aes-xts-plain -y -s 512 luksFormat /dev/sda2
**Confirm by tryping "YES".**
$ YES
**Open encrypted partition and mount to container "lvm".**
$ cryptsetup luksOpen /dev/sda2 lvm
**Create LVM physical volume.**
$ pvcreate /dev/mapper/lvm
**Create LVM volume group called "main".**
$ vgcreate main /dev/mapper/lvm
**Create LVM logical volumes for /root and /home.
Your root volume should be 25-50 GB big, your home volume takes up the remaining space.**
$ lvcreate -L 25G -n root main
$ lvcreate -l 100%FREE -n home main
**Create the filesystems and mount your volumes.**
$ mkfs.fat -F 32 -n UEFI /dev/sda1
_-F specifies the type of file allocation tables used (12, 16 or 32 bit).
-n sets the volume name (label) of the filesystem to "UEFI"._
**Create ext4 filesystem on root and home volumes.**
$ mkfs.ext4 -L root /dev/mapper/main-root
$ mkfs.ext4 -L home /dev/mapper/main-home
**Create mountpoints and mount partitions.**
$ mount /dev/mapper/main-root /mnt
$ mkdir /mnt/boot
$ mkdir /mnt/home
$ mount /dev/sda1 /mnt/boot
$ mount /dev/mapper/main-home /mnt/home
**Optionally update mirrorlist using reflector.**
_In this case use the latest 10 mirrors from Germany, that have been synchronized within the last 24 hours and sort the by download-rate and write them to the pacman mirrorlist._
$ reflector --verbose --latest 10 --country Germany --age 24 --protocol https --sort rate --save /etc/pacman.d/mirrorlist
**Install base system and basic packages (network, editor, sudo).**
**The package base-devel is not necessary but recommended.**
$ pacstrap /mnt base base-devel linux linux-firmware networkmanager nano sudo lvm2
**Optional: install all basic packages for KDE Plasma:**
$ pacstrap /mnt base base-devel linux linux-zen linux-firmware networkmanager nano sudo lvm2 sddm sddm-kcm plasma-desktop konsole firefox
**Generate fstab.**
$ genfstab -Up /mnt > /mnt/etc/fstab
_-U = Use UUID for source identifiers (shortcut for -t LABEL).
-p = Exclude pseudofs mounts (default behavior)._
**Chroot into your installation.**
$ arch-chroot /mnt
**Set your hostname.**
$ echo $host > /etc/hostname
**Generate locale.gen for your preferred language (and preferribly english).**
$ nano /etc/locale.gen
_Uncomment your language, e.g. de_DE.UTF-8 UTF-8 (and en_US.UTF-8)._
**Generate the locale.**
$ locale-gen
_The uncommented languages should appear followed by "done"._
**Add necessary HOOKS and MODULES.**
$ nano /etc/mkinitcpio.conf
```
MODULES=(ext4)
HOOKS=(base udev autodetect modconf block keyboard keymap encrypt lvm2 filesystems fsck shutdown)
```
**Create mkinitcpio.**
$ mkinitcpio -p linux-zen
**Enable NetworkManager and SDDM to start on next boot.**
$ systemctl enable NetworkManager sddm
**Set a root-password.**
$ passwd
**Install systemd-boot bootloader.**
$ bootctl install
**Create the bootloader config.**
$ nano /bootloader/entries/arch.conf
**Add the following:**
```
title Arch Linux
linux /vmlinuz-linux-zen
initrd /initramfs-linux-zen.img
options cryptdevice=/dev/sda2:main root=/dev/mapper/main-root rw lang=de init=/usr/lib/systemd/systemd locale=de_DE.UTF-8
```
**Create a fallback config.**
$ cp /boot/loader/entries/arch.conf /boot/loader/entries/arch-fallback.conf
**Edit the fallback config.**
$ nano /boot/loader/entries/arch-fallback.conf
**Change it to the following:**
```
title Arch Linux Fallback
linux /vmlinuz-linux
initrd /initramfs-linux.img
initrd /initramfs-linux-fallback.img
```
**Edit loader config.**
$ nano /boot/loader/loader.conf
**Change it to the following:**
```
timeout 1
default arch.conf
```
**Set your keyboard to your language.**
$ localectl --no-convert set-keymap de-latin1-nodeadkeys
**Create a user with a /home-directory.**
$ useradd -m $myusername
**Set password for your user.**
$ passwd $myusername
**Add $myusername to group wheel for sudo access.**
$ gpasswd -a $myusername wheel
**Edit sudoers-file for sudo access.**
$ nano /etc/sudoers
**Uncomment „%wheel ALL=(ALL) ALL“.**
**Don't forget to also delete the space between the # and %wheel.**
**Exit and reboot.**
$ exit
$ umount /mnt/boot
$ umount /mnt/home
$ reboot
**Now you are logged in to your Plasma desktop environment and ready to configure and use your Arch Linux.**
**Suggested packages to install.**
- microcode (https://wiki.archlinux.org/index.php/Microcode)
- kde-gtk-config (Adds graphical settings for GTK apps.)
- kdeplasma-addons („All kind of addons to improve your Plasma experience.“)
- kscreen (Adds screen section to graphical settings.)
- ksystemlog (Graphical system log viewer)
- partitionmanager (Graphical partition manager)
- plasma-nm (Network manager applet)
- plasma-pa (Audio manager applet)
- powerdevil (Adds energy manager to graphical settings.)
- spectacle (Graphical screenshot tool.)
- zram-generator (https://wiki.archlinux.org/title/Swap#zram-generator)
- reflector (https://wiki.archlinux.org/title/Reflector)
## Work in progress:
- KDE Connect
- UFW
- BackInTime and/or Timeshift
- breeze-gtk?
- Dolphin and/or Krusader
- Linux-Zen
- Pipewire
- rmtrash
- spectacle
- unrar, rar, zip
- yakuake
## Post installation configuration (WIP) :
- Reflector hook
- Installing yay